Split Pin Exporter, Manufacturer, Supplier In Rajkot, India

Product Description

Split Pin

Cotter pins 'Precise' definition is a pin with two ends originally positioned together that are fitted through a hole and then bent backwards to lock the pin in place. Cotter pins can be used to lock clevis pins or certain styles of washers.

Driven by technical excellence, we are counted as the topmost manufacturer and supplier of excellent quality Split Pin. Offered split pin is precisely manufactured with the usage of quality approved raw material and pioneered technology by our professionals. To assure remarkable quality of this product, over all assortment goes through multitude of testing procedures under the strict supervision of our quality auditors. Apart from this, our provided Split Pin is ideal to be used in off-shore construction and marine industry.

Features:

Flawless finish
High strength
Dimensional accuracy
Precisely designed

Normal length (L): The nominal length is the distance from underside of the eye to the extreme end of the short leg.

Nominal size: The nominal size is the diameter of the hole for the receiving the split pins.

Dimension	Nominal size	1	1.2	1.6	2	2.5	3.2	4	5	6.3	8	10	13	16
d	Max	0.9	1	1.4	1.8	2.3	2.9	3.7	4.6	5.9	7.5	9.5	12.4	15.4
d	Min	0.8	0.9	1.3	1.7	2.1	2.7	3.5	4.4	5.7	7.3	9.3	12.1	15.1
a	Max	1.6	2.5	2.5	2.5	2.5	3.2	4	4	4	4	6.3	6.3	6.3
a	Min	0.8	1.2	1.2	1.2	1.2	1.6	2	2	2	2	3.1	3.1	3.1
b	=	3	3	3.2	4	5	6.4	8	10	12.6	16	20	26	32
c	Max	1.8	2	2.8	3.6	4.6	5.8	7.4	9.2	11.8	15	19	24.8	30.8
	Min	1.6	1.7	2.4	3.2	4	5.1	6.5	8	10.3	13.1	16.6	21.7	27

The Dimensions and permissible tolerances on the dimensions is the indicated.

Material: Unless otherwise specified, split pins shall be manufactured from half round mild steel wires

Finish: Split pins shall be supplied with bright self-color finish unless otherwise specified by the purchaser. The end of each leg shall be beveled and shall be free from burrs

Designation: A split pin shall be designated by the nominal size, nominal length, the number of this standard and material (for other than steel only.)

Example 1: A split of nominal seize 5, nominal length 50mm and made of steel shall be designated as : Split pin 5 X 50 IS : 549
Example 2: A split pin of nominal size 10, nominal length 80mm and made of brass shall be designated as: Split Pin 10 X 80 IS: 549 Brass.

Sampling: Sampling and acceptance criteria shall conform to IS : 6821-1973 Methods for sampling non threaded fasteners.

Test: The samples selected for test, when cold shall permit half the length of the both the legs being best back through 180 and closed flat upon themselves without showing any sign of fracture.